top of page

Indoor environment

1. Temperature and RH spot readings (internal and external) (coincide with occupant survey)

2. Temperature and RH loggers/ monitoring (internal and external (e.g. weather station))

3. IAQ / IEQ read/logging lvl1: Additional parameters spot read/logged, e.g. CO2, lux, noise, wind speed

4. IAQ read/logging lvl2: Additional parameters, e.g. carbon monoxide (CO), PM(x) (particulate matter), volatile organic compounds (VOCs) (depending on design objectives)



Template / tool

How it works

How it works

Each study element in the I-BPE framework adopts a graduated approach (from levels 1 to 4) of increasing complexity and detail. These levels can be seen by selecting one study element.

For each element, Level 1 is the basic method to implementing the BPE element and higher levels can be added to the preceding levels for a deeper investigation. Note that though the design is additive with a graduated approach of increased complexity, lower levels are not always required to implement higher levels. 

Each level has guidance that can be accessed.

Several levels also have tools or templates that can be accessed. Note that the tools are only examples and may need to be updated for a particular location / climate and will need to be updated to fit the particular needs of your POE study.

bottom of page